"NH" Series Heavy Duty Hydraulic
Pit Leveler
The "NH" series of heavy duty hydraulic dock levelers are the ultimate in strength, convenience and reliability with full hydraulic powered deck and lip functions controlled by a single push button. Available in standard capacity ratings of 25,000 to 50,000 lbs. in increments of 5,000 lbs. and standard nominal sizes of 6 feet wide x 6 feet long to 7 feet wide x 10 feet long. Standard features include full operating range telescoping side guards, fall protection velocity fuse and a comprehensive warranty.
Smooth Transition Continuous Rear Hinge with Zinc Plated Rod
Optional Integrated
Control Systems
Exclusive Lip Lug & Header Plate Design
FEATURE SUMMARY
• Exclusive Lip Lug and Header Plate Design Ensures Maximum Strength
• Heavy Duty Cylinders with Non–Adjustable Velocity Fuse
• Continuous Fixed Rear Hinge Provides Easy Transfer & Eliminates Pinch, Trip or Impact Point
• Seven Rear Structural Frame Supports
• Dual Side 33% Beam to Deck Weld Pattern
• Security Night Locks
• Dust Tight Panel Enclosure
• Self Cleaning Lug Type Lip Hinge
• Open Frame Design for Easy Pit Cleaning
• Integral Maintenance Supports
• Full Operating Range Telescoping Side Guards
• Zinc Plated Hinge Rods
• Center Deck Support
• High Tensile Lip & Deck Safety Tread Plate
• Two Laminated Dock Bumpers Included
OPTIONS & ACCESSORIES
• Vehicle Restraint Systems
• Safety Barrier Gates
• 18" or 20" Long Lip
• Emergency Stop & Lip Extend Control
• Automatic Return to Dock Level
• Brush Weather Seals
• Self Forming Pour in Pans
• Steel Spring & Steel Face Dock Bumpers
• Dock Lights
OPERATION
The operator presses the control button until the
deck is raised and the lip is fully extended. Releasing
the button allows the lip to lower onto the truck
bed. The operator stores the leveler by pressing the
control button until the lip fully retracts.
The standard 16" long lip projects 11" beyond a 4"
bumper to engage a truck bed 12" above or below
floor level.
ELECTRICAL/HYDRAULICS
The power unit is a frame mounted integral assembly
fully tested and oil filled. The 1HP motor is a
totally enclosed non-ventilated type available in all
voltages. The control box is a NEMA 12 dust tight
enclosure with motor starter and single push button.
The regenerative hydraulic cylinders are a heavy duty
design with polished chrome rods, guide bearings
and high-pressure seals. The hydraulic hoses
are SAE 100R2 with permanent fittings attached.
CONSTRUCTION
The platform is a unitized welded structure with
continuous welds at the beam, header plate and
lugs for maximum strength. The deck plate, lip
plate, beam sections and lugs are constructed of
minimum 55,000 PSI yield material.
A standard center deck beam and welded side guards
provide additional deck plate support. The continuous
rear hinge provides 4" of side-to-side tilt with
no pinch point.
The frame has seven solid steel rear supports, an
open design for easy pit cleaning, and lip supports
that prevent illegal entry when the door is closed.
The front and rear hinge rods are SAE 1045 superior
shaft, zinc plated and factory coated with anti-seize
lubricant.
WARRANTY
The manufacturer guarantees that these "NH" Series
Heavy Duty Dock Levelers will perform as described and to the
full satisfaction of the purchaser for one-year from
date of receipt or they will repair, replace or
remove the product and refund the purchase price.
In addition, the front and rear hinge assemblies
are guaranteed, under specified guidelines, for a
period of twenty-years.
This series of dock levelers are designed to exceed the
requirements of ANSI MH14.1 1984-87 and when
properly applied comes with a 10 year structural
warranty. Consult your Loading Dock Pros representative for
assistance in choosing the correct capacity and
options for your application.
MODELS & NOMINAL DIMENSIONS
* Add capacity required from 25,000-50,000 lbs.
Example: NH-68-50.
Longer models and special size units
to fit any existing pit also available.
Smooth Transition Continuous Rear Hinge with Zinc Plated Rod
Optional Integrated
Control Systems
Exclusive Lip Lug & Header Plate Design
FEATURE SUMMARY
• Exclusive Lip Lug and Header Plate Design Ensures Maximum Strength
• Heavy Duty Cylinders with Non–Adjustable Velocity Fuse
• Continuous Fixed Rear Hinge Provides Easy Transfer & Eliminates Pinch, Trip or Impact Point
• Seven Rear Structural Frame Supports
• Dual Side 33% Beam to Deck Weld Pattern
• Security Night Locks
• Dust Tight Panel Enclosure
• Self Cleaning Lug Type Lip Hinge
• Open Frame Design for Easy Pit Cleaning
• Integral Maintenance Supports
• Full Operating Range Telescoping Side Guards
• Zinc Plated Hinge Rods
• Center Deck Support
• High Tensile Lip & Deck Safety Tread Plate
• Two Laminated Dock Bumpers Included
OPTIONS & ACCESSORIES
• Vehicle Restraint Systems
• Safety Barrier Gates
• 18" or 20" Long Lip
• Emergency Stop & Lip Extend Control
• Automatic Return to Dock Level
• Brush Weather Seals
• Self Forming Pour in Pans
• Steel Spring & Steel Face Dock Bumpers
• Dock Lights
OPERATION
The operator presses the control button until the
deck is raised and the lip is fully extended. Releasing
the button allows the lip to lower onto the truck
bed. The operator stores the leveler by pressing the
control button until the lip fully retracts.
The standard 16" long lip projects 11" beyond a 4"
bumper to engage a truck bed 12" above or below
floor level.
ELECTRICAL/HYDRAULICS
The power unit is a frame mounted integral assembly
fully tested and oil filled. The 1HP motor is a
totally enclosed non-ventilated type available in all
voltages. The control box is a NEMA 12 dust tight
enclosure with motor starter and single push button.
The regenerative hydraulic cylinders are a heavy duty
design with polished chrome rods, guide bearings
and high-pressure seals. The hydraulic hoses
are SAE 100R2 with permanent fittings attached.
CONSTRUCTION
The platform is a unitized welded structure with
continuous welds at the beam, header plate and
lugs for maximum strength. The deck plate, lip
plate, beam sections and lugs are constructed of
minimum 55,000 PSI yield material.
A standard center deck beam and welded side guards
provide additional deck plate support. The continuous
rear hinge provides 4" of side-to-side tilt with
no pinch point.
The frame has seven solid steel rear supports, an
open design for easy pit cleaning, and lip supports
that prevent illegal entry when the door is closed.
The front and rear hinge rods are SAE 1045 superior
shaft, zinc plated and factory coated with anti-seize
lubricant.
WARRANTY
The manufacturer guarantees that these "NH" Series
Heavy Duty Dock Levelers will perform as described and to the
full satisfaction of the purchaser for one-year from
date of receipt or they will repair, replace or
remove the product and refund the purchase price.
In addition, the front and rear hinge assemblies
are guaranteed, under specified guidelines, for a
period of twenty-years.
This series of dock levelers are designed to exceed the
requirements of ANSI MH14.1 1984-87 and when
properly applied comes with a 10 year structural
warranty. Consult your Loading Dock Pros representative for
assistance in choosing the correct capacity and
options for your application.
MODELS & NOMINAL DIMENSIONS
* Add capacity required from 25,000-50,000 lbs.
Example: NH-68-50.
Longer models and special size units
to fit any existing pit also available.
Model* | Width |
Length |
---|---|---|
NH-66 | 6'0" |
6'0" |
NH-68 |
6'0" |
8'0" |
NH-610 |
6'0" |
10'0" |
NH-6.56 |
6'6" |
6'0" |
NH-6.58 |
6'6" |
8'0" |
NH-6.510 |
6'6" |
10'0" |
NH-76 |
7'0" |
6'0" |
NH-78 |
7'0" |
8'0" |
NH-710 |
7'0" |
10'0" |
Check out the corresponding truck restraint systems/dock locks
we offer to go with our "NH" Series Heavy Duty Hydraulic Pit Leveler.
we offer to go with our "NH" Series Heavy Duty Hydraulic Pit Leveler.