"PA1000" Air Bag Leveler

55,000 lb. Minimum yield steel tread plate on the deck and lip

Heavy Duty, PVC-coated polyester fiber bag is resistant to chemical and puncture damage as well as temperature extremes.

All operations are controlled from a pre-wired wall mounted control box.

Full range toe guards powder coated safety yellow

Grease fittings on lip hinge

Lip will yield under impact

4 1/2” laminated bumpers, two per dock leveler

16″ Lip projection – 12″ beyond bumpers

Cross traffic support and night lock security to be provided by lip stored in lip keepers

Standard maintenance strut

Standard dynamic capacities available

Operating range of 12″ above to 12″ below deck

Leveler may be recycled with truck in position

Safety legs automatically provide multiple below dock safety points

3 year warranty on all structural members

“PA” Series Air Activated Pit Leveler Architectural Specifications

Type: Loading dock leveler shall be air activated, push button operated with no moving parts.

Product Characteristics: Dock Levelers

1. Product: “Air bag” style dock leveler – Model PA_____________

2. Size: ____” wide x ____’ long, ____” deep to fit ____” deep pit.

3. Capacity: _____________ lbs. Dynamic
(Capacities available - 30, 35, 40, & 45,000 lb.)

4. Construction: The platform shall be ¼” thick, 55,000 lb. minimum yield steel tread plate. Platform support shall be entire length and fully welded at front of leveler to full width header plate. Lip shall be ½” thick (5/8” thick on 35K and above), 55,000 lb. minimum yield steel tread plate with a projection beyond the platform edge of 16” and 12” beyond the bumpers. Lip hinge pin shall be 1” cold rolled CF1045 steel shaft. Hinge tubes are 1 1/8” I.D. seamless with grease fittings. Toe guards shall be Full range, powder coated safety yellow type as
standard.

5. Operation: Fully automatic deck and lip actuation. Single rotary button remote controls all stages of operation. When spring loaded switch is turned
leveler will raise and lip will extend. When switch is released, unit will descend onto the truck bed. When loading/unloading is complete dock attendant will return leveler to it’s stored position by single switch controls. No limit switches to be
accepted.

6. Characteristics: Unit shall have a working range of 12” above and 12” below dock level. Ramp to be recyclable with truck in position at dock. Cross traffic support and night lock security to be provided by lip stored in lip keepers. Levelers and warranty shall meet or exceed the performance
requirements of CS202-56., O.S.H.A. and ANSI MH-14.1. 1 – 1984.

7. Weather seal: Brush type (meets FDA requirements) weather seals optional.

8. Bumpers: Two P4H1012 (4.5” thick x 10” high x 12” wide) laminated per dock leveler.

Please contact us for:
Submittal Drawings PA1000 Air Bag Pit Leveler
PA1000 Series Air Bag Pit Leveler Installation Instructions

Check out the corresponding truck restraint systems/dock locks
we offer to go with our "PA1000" Air Bag Leveler.